7.5KW Side Draft Paint Booth Turbo Fan Australia Model WD-600

Inside dimension

6900×3900×2650mm(L×W×H)

Outside dimension

7000×5450×3400 mm(L×W×H)

Wall panels

Thickness: 50mm, width: 1150mm, tongue and groove structure,

with polystyrene (EPS) insulation inside, colour: white.

Doors

Folding main door, 4 folds, 3200×2700 mm(W×H), made by bending steel

without cover frame, colour : Blue.

Escape door :1 unit escape door, 800×2000mm (W×H), colour: white

Basement

Galvanized steel assemble, 300mm high, quadrate steel support, 5 rows of grilles

made by flat bar and twisted steel, then galvanized. 4 ramps,

external setting, 750×2000mm/pc.

Intake air system

1×7.5KW direct drive turbo fan, power: 7.5KW, air capacity: 25000m3/h, direct drive.

Exhaust air system

1×7.5KW direct drive turbo fan, power: 7.5KW, air capacity: 25000m3/h, direct drive.

Damper actuates

Pneumatic damper actuates from spraying to baking cycle. Electric damper

for exhaust air.

Heating system

RIELLO RG5S diesel burner, stainless steel heat exchanger, Max.

Heating productivity: 260000kcal/h. Max. working temperature: 80℃.

Filtering system

pre-filter, ceiling filter, fibreglass filter, activated carbon filter

Filtering area

21M2

Lighting

Ceiling Lights: 10Units×4Pcs=40Pcs×36W with electronic ballasts.

Side Lights: 8Units×4Pcs=32Pcs×36W, with electronic ballasts.

Control system

Spraying, heat spraying, baking, time setting, lighting switch, failure indicator,

thermostat, power supply switch, emergency stop, hour meter, temperature limit

controller, pressure gauge, pressure alarm system, all motor are full voltage star.

Total power

18KW